#include <BoundarySubtractedCylinderSurface.h>

Inheritance diagram for Trk::BoundarySubtractedCylinderSurface< Tvol >:

Collaboration diagram for Trk::BoundarySubtractedCylinderSurface< Tvol >:

Public Types
using	ChargedTrackParametersUniquePtr = std::unique_ptr< ParametersBase< 5, Trk::Charged > >
	Unique ptr types. More...

using	NeutralTrackParametersUniquePtr = std::unique_ptr< ParametersBase< 5, Trk::Neutral > >

Public Member Functions
	BoundarySubtractedCylinderSurface ()=default
	Default Constructor - needed for pool and inherited classes. More...

	BoundarySubtractedCylinderSurface (const BoundarySubtractedCylinderSurface< Tvol > &bcs)=default
	Copy constructor. More...

virtual	~BoundarySubtractedCylinderSurface ()=default
	Virtual Destructor. More...

BoundarySubtractedCylinderSurface &	operator= (const BoundarySubtractedCylinderSurface &vol)=default
	Assignment operator. More...

	BoundarySubtractedCylinderSurface (const Tvol inside, const Tvol outside, const SubtractedCylinderSurface &csf)
	Constructor for a Boundary with exact two Volumes attached to it. More...

	BoundarySubtractedCylinderSurface (SharedObject< VolumeArray > insideArray, SharedObject< VolumeArray > outsideArray, const SubtractedCylinderSurface &csf)
	Constructor for a Boundary with two VolumeArrays attached to it. More...

	BoundarySubtractedCylinderSurface (const Tvol inside, const Tvol outside, const SubtractedCylinderSurface &csf, const Amg::Transform3D &tr)
	Copy constructor with a shift. More...

virtual const Tvol *	attachedVolume (const TrackParameters &parms, PropDirection dir) const override final
	Get the next Volume depending on the TrackParameters and the requested direction, gives back 0 if there's no volume attached to the requested direction. More...

virtual const Tvol *	attachedVolume (const Amg::Vector3D &pos, const Amg::Vector3D &mom, PropDirection dir) const override final
	Get the next Volume depending on GlobalPosition, GlobalMomentum, dir on the TrackParameters and the requested direction. More...

virtual const Surface &	surfaceRepresentation () const override final
	The Surface Representation of this. More...

virtual Surface &	surfaceRepresentation () override final

template<class T >
bool	onBoundary (const T &pars) const
	templated onBoundary method More...

void	debugInfo (MsgStream &msg) const
	output debug information More...

Tvol const *	insideVolume () const
	getters/setters for inside/outside Volume More...

void	setInsideVolume (const Tvol *)

Tvol const *	outsideVolume () const

void	setOutsideVolume (const Tvol *)

const SharedObject< VolumeArray > &	insideVolumeArray () const
	getters/setters for inside/outside Volume arrays More...

void	setInsideVolumeArray (const SharedObject< VolumeArray > &)

const SharedObject< VolumeArray > &	outsideVolumeArray () const

void	setOutsideVolumeArray (const SharedObject< VolumeArray > &)

virtual bool	operator== (const Surface &sf) const override final
	Equality operator. More...

bool	operator== (const CylinderSurface &cf) const

bool	shared () const
	This method indicates the subtraction mode. More...

virtual bool	insideBounds (const Amg::Vector2D &locpos, double tol1=0., double tol2=0.) const override final
	This method calls the inside() method of the Bounds. More...

SharedObject< AreaExcluder >	subtractedVolume () const
	This method allows access to the subtracted part. More...

virtual std::string	name () const override final
	Return properly formatted class name for screen output. More...

virtual CylinderSurface *	clone () const override
	Implicit Constructor. More...

virtual Surface::ChargedTrackParametersUniquePtr	createUniqueTrackParameters (double l1, double l2, double phi, double theta, double qop, std::optional< AmgSymMatrix(5)> cov=std::nullopt) const override final
	Use the Surface as a ParametersBase constructor, from local parameters - charged. More...

virtual Surface::ChargedTrackParametersUniquePtr	createUniqueTrackParameters (const Amg::Vector3D &position, const Amg::Vector3D &momentum, double charge, std::optional< AmgSymMatrix(5)> cov=std::nullopt) const override final
	Use the Surface as a ParametersBase constructor, from global parameters - charged. More...

virtual NeutralTrackParametersUniquePtr	createUniqueNeutralParameters (double l1, double l2, double phi, double theta, double qop, std::optional< AmgSymMatrix(5)> cov=std::nullopt) const override final
	Use the Surface as a ParametersBase constructor, from local parameters - neutral. More...

virtual NeutralTrackParametersUniquePtr	createUniqueNeutralParameters (const Amg::Vector3D &position, const Amg::Vector3D &momentum, double charge, std::optional< AmgSymMatrix(5)> cov=std::nullopt) const override final
	Use the Surface as a ParametersBase constructor, from global parameters - neutral. More...

template<int DIM, class T >
std::unique_ptr< ParametersT< DIM, T, CylinderSurface > >	createUniqueParameters (double l1, double l2, double phi, double theta, double qop, std::optional< AmgSymMatrix(DIM)> cov=std::nullopt) const
	Use the Surface as a ParametersBase constructor, from local parameters. More...

template<int DIM, class T >
std::unique_ptr< ParametersT< DIM, T, CylinderSurface > >	createUniqueParameters (const Amg::Vector3D &position, const Amg::Vector3D &momentum, double charge, std::optional< AmgSymMatrix(DIM)> cov=std::nullopt) const
	Use the Surface as a ParametersBase constructor, from global parameters. More...

virtual Amg::RotationMatrix3D	measurementFrame (const Amg::Vector3D &glopos, const Amg::Vector3D &glomom) const override final
	Return the measurement frame - this is needed for alignment, in particular for StraightLine and Perigee Surface. More...

constexpr virtual SurfaceType	type () const override final
	Return the surface type. More...

virtual const Amg::Vector3D &	globalReferencePoint () const override final
	Returns a global reference point: For the Cylinder this is \( (Rcos(\phi), Rsin(\phi),0)*transform() \) Where \( \phi \) denotes the averagePhi() of the cylinderBounds. More...

virtual Amg::Vector3D	normal (const Amg::Vector2D &locpo) const override final
	Return method for surface normal information at a given local point, overwrites the normal() from base class. More...

virtual const Amg::Vector3D &	normal () const
	Returns the normal vector of the Surface (i.e. More...

virtual const Amg::Vector3D &	rotSymmetryAxis () const
	Return method for the rotational symmetry axis - the z-Axis of the HepTransform. More...

virtual const CylinderBounds &	bounds () const override final
	This method returns the CylinderBounds by reference (NoBounds is not possible for cylinder) More...

bool	hasBounds () const

virtual bool	insideBoundsCheck (const Amg::Vector2D &locpos, const BoundaryCheck &bchk) const override final

virtual Amg::Vector2D	localParametersToPosition (const LocalParameters &locpars) const override final
	Specialized for CylinderSurface : LocalParameters to Vector2D. More...

virtual void	localToGlobal (const Amg::Vector2D &locp, const Amg::Vector3D &mom, Amg::Vector3D &glob) const override
	Specialized for CylinderSurface : LocalToGlobal method without dynamic memory allocation. More...

Amg::Vector3D	localToGlobal (const Amg::Vector2D &locpos) const
	This method returns the GlobalPosition from a LocalPosition uses the per surface localToGlobal. More...

Amg::Vector3D	localToGlobal (const Amg::Vector2D &locpos, const Amg::Vector3D &glomom) const
	This method returns the GlobalPosition from a LocalPosition The LocalPosition can be outside Surface bounds - for generality with momentum. More...

Amg::Vector3D	localToGlobal (const LocalParameters &locpars) const
	This method returns the GlobalPosition from LocalParameters The LocalParameters can be outside Surface bounds. More...

Amg::Vector3D	localToGlobal (const LocalParameters &locpars, const Amg::Vector3D &glomom) const
	This method returns the GlobalPosition from LocalParameters The LocalParameters can be outside Surface bounds - for generality with momentum. More...

virtual bool	globalToLocal (const Amg::Vector3D &glob, const Amg::Vector3D &mom, Amg::Vector2D &loc) const override
	Specialized for CylinderSurface : GlobalToLocal method without dynamic memory allocation - boolean checks if on surface. More...

std::optional< Amg::Vector2D >	globalToLocal (const Amg::Vector3D &glopos, double tol=0.) const
	This method returns the LocalPosition from a provided GlobalPosition. More...

std::optional< Amg::Vector2D >	globalToLocal (const Amg::Vector3D &glopos, const Amg::Vector3D &glomom) const
	This method returns the LocalPosition from a provided GlobalPosition. More...

virtual bool	isOnSurface (const Amg::Vector3D &glopo, const BoundaryCheck &bchk=true, double tol1=0., double tol2=0.) const override
	This method returns true if the GlobalPosition is on the Surface for both, within or without check of whether the local position is inside boundaries or not. More...

virtual Intersection	straightLineIntersection (const Amg::Vector3D &pos, const Amg::Vector3D &dir, bool forceDir=false, Trk::BoundaryCheck bchk=false) const override final
	fast straight line intersection schema - provides closest intersection and (signed) path length More...

template<class T >
Intersection	straightLineIntersection (const T &pars, bool forceDir=false, const Trk::BoundaryCheck &bchk=false) const
	fst straight line intersection schema - templated for charged and neutral parameters More...

virtual DistanceSolution	straightLineDistanceEstimate (const Amg::Vector3D &pos, const Amg::Vector3D &dir) const override
	fast distance to Surface More...

virtual DistanceSolution	straightLineDistanceEstimate (const Amg::Vector3D &pos, const Amg::Vector3D &dir, bool bound) const override
	fast distance to Surface - with bounds directive More...

virtual double	pathCorrection (const Amg::Vector3D &pos, const Amg::Vector3D &mom) const override
	the pathCorrection for derived classes with thickness More...

bool	operator!= (const Surface &sf) const
	Non-equality operator. More...

std::unique_ptr< Surface >	uniqueClone () const
	NVI method returning unique_ptr clone. More...

const Amg::Transform3D *	cachedTransform () const
	Return the cached transformation directly. More...

const Amg::Transform3D &	transform () const
	Returns HepGeom::Transform3D by reference. More...

const Amg::Vector3D &	center () const
	Returns the center position of the Surface. More...

const TrkDetElementBase *	associatedDetectorElement () const
	return associated Detector Element More...

Identifier	associatedDetectorElementIdentifier () const
	return Identifier of the associated Detector Element More...

const Trk::Layer *	associatedLayer () const
	return the associated Layer More...

const Trk::Layer *	materialLayer () const
	return the material Layer More...

Trk::Layer *	materialLayer ()

virtual const Trk::Surface *	baseSurface () const
	return the base surface (simplified for persistification) More...

std::optional< Amg::Vector2D >	positionOnSurface (const Amg::Vector3D &glopo, const BoundaryCheck &bchk=true, double tol1=0., double tol2=0.) const
	positionOnSurface() returns the LocalPosition on the Surface, If BoundaryCheck==false it just returns the value of globalToLocal (including nullptr possibility), if BoundaryCheck==true it checks whether the point is inside bounds or not (returns std::nullopt in this case). More...

template<class T >
bool	onSurface (const T &parameters, const BoundaryCheck &bchk=BoundaryCheck(true)) const
	The templated Parameters OnSurface method - checks on surface pointer first. More...

bool	isFree () const
	Returns 'true' if this surface is 'free', i.e. More...

bool	isActive () const
	Return 'true' if this surface is owned by the detector element. More...

void	setTransform (const Amg::Transform3D &trans)
	Set the transform updates center and normal. More...

void	setOwner (SurfaceOwner x)
	set Ownership More...

SurfaceOwner	owner () const
	return ownership More...

void	setMaterialLayer (std::shared_ptr< Layer > mlay)
	set material layer More...

virtual MsgStream &	dump (MsgStream &sl) const
	Output Method for MsgStream, to be overloaded by child classes. More...

virtual std::ostream &	dump (std::ostream &sl) const
	Output Method for std::ostream, to be overloaded by child classes. More...

void	associateLayer (const Layer &lay)
	method to associate the associated Trk::Layer which is alreay owned More...

Static Public Member Functions
static std::size_t	numberOfInstantiations ()

Static Public Attributes
static constexpr SurfaceType	staticType = SurfaceType::Cylinder
	The surface type static constexpr. More...

static std::atomic_size_t	s_numberOfInstantiations

Protected Member Functions
Amg::Transform3D	inverseTransformHelper () const
	Helper method to factorize in one place common operations calculate inverse transofrm and multiply with position. More...

Amg::Vector3D	inverseTransformMultHelper (const Amg::Vector3D &glopos) const

Protected Attributes
const Tvol *	m_insideVolume

const Tvol *	m_outsideVolume

SharedObject< VolumeArray >	m_insideVolumeArray

SharedObject< VolumeArray >	m_outsideVolumeArray

SharedObject< AreaExcluder >	m_subtrVol

bool	m_shared

SharedObject< const CylinderBounds >	m_bounds
	The global reference point (== a point on the surface) More...

CxxUtils::CachedUniquePtr< Amg::Vector3D >	m_referencePoint
	The rotational symmetry axis. More...

CxxUtils::CachedUniquePtr< Amg::Vector3D >	m_rotSymmetryAxis

std::unique_ptr< Transforms >	m_transforms {}

const TrkDetElementBase *	m_associatedDetElement {}
	Not owning Pointer to the TrkDetElementBase. More...

Identifier	m_associatedDetElementId {}
	Identifier for the TrkDetElementBase. More...

const Layer *	m_associatedLayer {}
	The associated layer Trk::Layer. More...

std::shared_ptr< Layer >	m_materialLayer {}
	Possibility to attach a material descrption. More...

SurfaceOwner	m_owner {SurfaceOwner::noOwn}
	enum for surface owner : 0 free surface More...

Static Protected Attributes
static constexpr double	s_onSurfaceTolerance = 10e-5
	Tolerance for being on Surface. More...

Private Types
typedef BinnedArray< Tvol >	VolumeArray
	typedef the BinnedArray More...

Detailed Description

template<class Tvol>
class Trk::BoundarySubtractedCylinderSurface< Tvol >

BoundarySubtractedCylinderSurface description inside the tracking realm, it extends the Surface description to make a surface being a boundary of a Trk::Volume

Author: Andre.nosp@m.as.S.nosp@m.alzbu.nosp@m.rger.nosp@m.@cern.nosp@m..ch; Christos Anastopoulos (Athena MT modifications)

Definition at line 36 of file BoundarySubtractedCylinderSurface.h.

Member Typedef Documentation

◆ ChargedTrackParametersUniquePtr

using Trk::Surface::ChargedTrackParametersUniquePtr = std::unique_ptr<ParametersBase<5, Trk::Charged> >

inherited

Unique ptr types.

Definition at line 124 of file Tracking/TrkDetDescr/TrkSurfaces/TrkSurfaces/Surface.h.

◆ NeutralTrackParametersUniquePtr

using Trk::Surface::NeutralTrackParametersUniquePtr = std::unique_ptr<ParametersBase<5, Trk::Neutral> >

inherited

Definition at line 126 of file Tracking/TrkDetDescr/TrkSurfaces/TrkSurfaces/Surface.h.

◆ VolumeArray

template<class Tvol >

typedef BinnedArray<Tvol> Trk::BoundarySubtractedCylinderSurface< Tvol >::VolumeArray

private

typedef the BinnedArray

Definition at line 40 of file BoundarySubtractedCylinderSurface.h.

Constructor & Destructor Documentation

◆ BoundarySubtractedCylinderSurface() [1/5]

template<class Tvol >

Trk::BoundarySubtractedCylinderSurface< Tvol >::BoundarySubtractedCylinderSurface ( )

default

Default Constructor - needed for pool and inherited classes.

◆ BoundarySubtractedCylinderSurface() [2/5]

template<class Tvol >

Trk::BoundarySubtractedCylinderSurface< Tvol >::BoundarySubtractedCylinderSurface ( const BoundarySubtractedCylinderSurface< Tvol > & bcs )

default

Copy constructor.

◆ ~BoundarySubtractedCylinderSurface()

template<class Tvol >

virtual Trk::BoundarySubtractedCylinderSurface< Tvol >::~BoundarySubtractedCylinderSurface ( )

virtualdefault

Virtual Destructor.

◆ BoundarySubtractedCylinderSurface() [3/5]

template<class Tvol >

Trk::BoundarySubtractedCylinderSurface< Tvol >::BoundarySubtractedCylinderSurface	(	const Tvol *	inside,
		const Tvol *	outside,
		const SubtractedCylinderSurface &	csf
	)

inline

Constructor for a Boundary with exact two Volumes attached to it.

Definition at line 58 of file BoundarySubtractedCylinderSurface.h.

60 : BoundarySurface<Tvol>(inside, outside),

61 SubtractedCylinderSurface(csf) {}

◆ BoundarySubtractedCylinderSurface() [4/5]

template<class Tvol >

Trk::BoundarySubtractedCylinderSurface< Tvol >::BoundarySubtractedCylinderSurface	(	SharedObject< VolumeArray >	insideArray,
		SharedObject< VolumeArray >	outsideArray,
		const SubtractedCylinderSurface &	csf
	)

inline

Constructor for a Boundary with two VolumeArrays attached to it.

Definition at line 64 of file BoundarySubtractedCylinderSurface.h.

67 : BoundarySurface<Tvol>(insideArray, outsideArray),

68 SubtractedCylinderSurface(csf) {}

◆ BoundarySubtractedCylinderSurface() [5/5]

template<class Tvol >

Trk::BoundarySubtractedCylinderSurface< Tvol >::BoundarySubtractedCylinderSurface	(	const Tvol *	inside,
		const Tvol *	outside,
		const SubtractedCylinderSurface &	csf,
		const Amg::Transform3D &	tr
	)

inline

Copy constructor with a shift.

Definition at line 71 of file BoundarySubtractedCylinderSurface.h.

74 : BoundarySurface<Tvol>(inside, outside),

75 SubtractedCylinderSurface(csf, tr) {}

Member Function Documentation

◆ associatedDetectorElement()

const TrkDetElementBase* Trk::Surface::associatedDetectorElement ( ) const

inherited

return associated Detector Element

◆ associatedDetectorElementIdentifier()

Identifier Trk::Surface::associatedDetectorElementIdentifier ( ) const

inherited

return Identifier of the associated Detector Element

◆ associatedLayer()

const Trk::Layer* Trk::Surface::associatedLayer ( ) const

inherited

return the associated Layer

◆ associateLayer()

void Trk::Surface::associateLayer ( const Layer & lay )

inherited

method to associate the associated Trk::Layer which is alreay owned

only allowed by LayerBuilder
only done if no Layer is set already

◆ attachedVolume() [1/2]

template<class Tvol >

virtual const Tvol* Trk::BoundarySubtractedCylinderSurface< Tvol >::attachedVolume	(	const Amg::Vector3D &	pos,
		const Amg::Vector3D &	mom,
		PropDirection	dir
	)		const

finaloverridevirtual

Get the next Volume depending on GlobalPosition, GlobalMomentum, dir on the TrackParameters and the requested direction.

Implements Trk::BoundarySurface< Tvol >.

◆ attachedVolume() [2/2]

template<class Tvol >

virtual const Tvol* Trk::BoundarySubtractedCylinderSurface< Tvol >::attachedVolume	(	const TrackParameters &	parms,
		PropDirection	dir
	)		const

finaloverridevirtual

Get the next Volume depending on the TrackParameters and the requested direction, gives back 0 if there's no volume attached to the requested direction.

this is speed optimized as it doesn't invoke a local to global transformation

Implements Trk::BoundarySurface< Tvol >.

◆ baseSurface()

virtual const Trk::Surface* Trk::Surface::baseSurface ( ) const

virtualinherited

return the base surface (simplified for persistification)

◆ bounds()

virtual const CylinderBounds& Trk::CylinderSurface::bounds ( ) const

finaloverridevirtualinherited

This method returns the CylinderBounds by reference (NoBounds is not possible for cylinder)

Implements Trk::Surface.

◆ cachedTransform()

const Amg::Transform3D* Trk::Surface::cachedTransform ( ) const

inherited

Return the cached transformation directly.

Don't try to make a new transform if it's not here.

◆ center()

const Amg::Vector3D& Trk::Surface::center ( ) const

inherited

Returns the center position of the Surface.

◆ clone()

virtual CylinderSurface* Trk::CylinderSurface::clone ( ) const

overridevirtualinherited

Implicit Constructor.

Implements Trk::Surface.

◆ createUniqueNeutralParameters() [1/2]

Trk::Surface::NeutralTrackParametersUniquePtr Trk::CylinderSurface::createUniqueNeutralParameters	(	const Amg::Vector3D &	position,
		const Amg::Vector3D &	momentum,
		double	charge,
		std::optional< AmgSymMatrix(5)>	cov = `std::nullopt`
	)		const

finaloverridevirtualinherited

Use the Surface as a ParametersBase constructor, from global parameters - neutral.

Implements Trk::Surface.

Definition at line 159 of file CylinderSurface.cxx.

                                             {
   return std::make_unique<ParametersT<5, Neutral, CylinderSurface>>(
       position, momentum, charge, *this, std::move(cov));
 }

◆ createUniqueNeutralParameters() [2/2]

Trk::Surface::NeutralTrackParametersUniquePtr Trk::CylinderSurface::createUniqueNeutralParameters	(	double	l1,
		double	l2,
		double	phi,
		double	theta,
		double	qop,
		std::optional< AmgSymMatrix(5)>	cov = `std::nullopt`
	)		const

finaloverridevirtualinherited

Use the Surface as a ParametersBase constructor, from local parameters - neutral.

Implements Trk::Surface.

Definition at line 149 of file CylinderSurface.cxx.

                                             {
   return std::make_unique<ParametersT<5, Neutral, CylinderSurface>>(
       l1, l2, phi, theta, qop, *this, std::move(cov));
 }

◆ createUniqueParameters() [1/2]

template<int DIM, class T >

std::unique_ptr<ParametersT<DIM, T, CylinderSurface> > Trk::CylinderSurface::createUniqueParameters	(	const Amg::Vector3D &	position,
		const Amg::Vector3D &	momentum,
		double	charge,
		std::optional< AmgSymMatrix(DIM)>	cov = `std::nullopt`
	)		const

inherited

Use the Surface as a ParametersBase constructor, from global parameters.

◆ createUniqueParameters() [2/2]

template<int DIM, class T >

std::unique_ptr<ParametersT<DIM, T, CylinderSurface> > Trk::CylinderSurface::createUniqueParameters	(	double	l1,
		double	l2,
		double	phi,
		double	theta,
		double	qop,
		std::optional< AmgSymMatrix(DIM)>	cov = `std::nullopt`
	)		const

inherited

Use the Surface as a ParametersBase constructor, from local parameters.

◆ createUniqueTrackParameters() [1/2]

Trk::Surface::ChargedTrackParametersUniquePtr Trk::CylinderSurface::createUniqueTrackParameters	(	const Amg::Vector3D &	position,
		const Amg::Vector3D &	momentum,
		double	charge,
		std::optional< AmgSymMatrix(5)>	cov = `std::nullopt`
	)		const

finaloverridevirtualinherited

Use the Surface as a ParametersBase constructor, from global parameters - charged.

Implements Trk::Surface.

Definition at line 139 of file CylinderSurface.cxx.

                                             {
   return std::make_unique<ParametersT<5, Charged, CylinderSurface>>(
       position, momentum, charge, *this, std::move(cov));
 }

◆ createUniqueTrackParameters() [2/2]

Trk::Surface::ChargedTrackParametersUniquePtr Trk::CylinderSurface::createUniqueTrackParameters	(	double	l1,
		double	l2,
		double	phi,
		double	theta,
		double	qop,
		std::optional< AmgSymMatrix(5)>	cov = `std::nullopt`
	)		const

finaloverridevirtualinherited

Use the Surface as a ParametersBase constructor, from local parameters - charged.

Implements Trk::Surface.

Definition at line 129 of file CylinderSurface.cxx.

                                             {
   return std::make_unique<ParametersT<5, Charged, CylinderSurface>>(
       l1, l2, phi, theta, qop, *this, std::move(cov));
 }

◆ debugInfo()

template<class Tvol >

void Trk::BoundarySurface< Tvol >::debugInfo ( MsgStream & msg ) const

inlineinherited

output debug information

Definition at line 165 of file BoundarySurface.h.

                                                                  {
   msg << "BoundarySurface debug information: " << std::endl;
   msg << "     -> pointer to insideVolume         = " << m_insideVolume
       << std::endl;
   msg << "     -> pointer to insideVolumeArray    = "
       << m_insideVolumeArray.get() << std::endl;
   msg << "     -> pointer to outsideVolume        = " << m_outsideVolume
       << std::endl;
   msg << "     -> pointer to outsideVolumeArray   = "
       << m_outsideVolumeArray.get() << endmsg;
 }

◆ dump() [1/2]

MsgStream & Surface::dump ( MsgStream & sl ) const

virtualinherited

Output Method for MsgStream, to be overloaded by child classes.

Reimplemented in Trk::PerigeeSurface, and Trk::DetElementSurface.

Definition at line 157 of file Surface.cxx.

 {
   sl << std::setiosflags(std::ios::fixed);
   sl << std::setprecision(4);
   sl << name() << std::endl;
   if (associatedDetectorElement()!=nullptr){
     sl<<"     Detector Type              = "<<associatedDetectorElement()->detectorTypeString()<<std::endl;
   }
   sl << "     Center position  (x, y, z) = (" << center().x() << ", " << center().y() << ", " << center().z() << ")"
      << std::endl;
   Amg::RotationMatrix3D rot(transform().linear());
   Amg::Vector3D rotX(rot.col(0));
   Amg::Vector3D rotY(rot.col(1));
   Amg::Vector3D rotZ(rot.col(2));
   sl << std::setprecision(6);
   sl << "     Rotation:             colX = (" << rotX(0) << ", " << rotX(1) << ", " << rotX(2) << ")" << std::endl;
   sl << "                           colY = (" << rotY(0) << ", " << rotY(1) << ", " << rotY(2) << ")" << std::endl;
   sl << "                           colZ = (" << rotZ(0) << ", " << rotZ(1) << ", " << rotZ(2) << ")" << std::endl;
   sl << "     Bounds  : " << bounds();
   if (!checkTransform(*this)) {
      sl << std::endl << "     NOT a strict rotation matrix." << std::endl;
   }
   sl << std::setprecision(-1);
   return sl;
 }

◆ dump() [2/2]

std::ostream & Surface::dump ( std::ostream & sl ) const

virtualinherited

Output Method for std::ostream, to be overloaded by child classes.

Reimplemented in Trk::PerigeeSurface, and Trk::DetElementSurface.

Definition at line 185 of file Surface.cxx.

 {
   sl << std::setiosflags(std::ios::fixed);
   sl << std::setprecision(4);
   sl << name() << std::endl;
   if (associatedDetectorElement()!=nullptr){
     sl<<"     Detector Type              = "<<associatedDetectorElement()->detectorTypeString()<<std::endl;
   }
   sl << "     Center position  (x, y, z) = (" << center().x() << ", " << center().y() << ", " << center().z() << ")"
      << std::endl;
   Amg::RotationMatrix3D rot(transform().linear());
   Amg::Vector3D rotX(rot.col(0));
   Amg::Vector3D rotY(rot.col(1));
   Amg::Vector3D rotZ(rot.col(2));
   sl << std::setprecision(6);
   sl << "     Rotation:             colX = (" << rotX(0) << ", " << rotX(1) << ", " << rotX(2) << ")" << std::endl;
   sl << "                           colY = (" << rotY(0) << ", " << rotY(1) << ", " << rotY(2) << ")" << std::endl;
   sl << "                           colZ = (" << rotZ(0) << ", " << rotZ(1) << ", " << rotZ(2) << ")" << std::endl;
   sl << "     Bounds  : " << bounds();
   if (!checkTransform(*this)) {
      sl << std::endl << "     NOT a strict rotation matrix." << std::endl;
   }
   sl << std::setprecision(-1);
   return sl;
 }

◆ globalReferencePoint()

const Amg::Vector3D & Trk::CylinderSurface::globalReferencePoint ( ) const

finaloverridevirtualinherited

Returns a global reference point: For the Cylinder this is \( (R*cos(\phi), R*sin(\phi),0)*transform() \) Where \( \phi \) denotes the averagePhi() of the cylinderBounds.

Reimplemented from Trk::Surface.

Definition at line 167 of file CylinderSurface.cxx.

 {
   if (!m_referencePoint) {
     double rMedium = bounds().r();
     double phi = bounds().averagePhi();
     Amg::Vector3D gp(rMedium * cos(phi), rMedium * sin(phi), 0.);
     m_referencePoint.set(std::make_unique<Amg::Vector3D>(transform() * gp));
   }
   return (*m_referencePoint);
 }

◆ globalToLocal() [1/3]

bool Trk::CylinderSurface::globalToLocal	(	const Amg::Vector3D &	glob,
		const Amg::Vector3D &	mom,
		Amg::Vector2D &	loc
	)		const

overridevirtualinherited

Specialized for CylinderSurface : GlobalToLocal method without dynamic memory allocation - boolean checks if on surface.

Implements Trk::Surface.

Reimplemented in Trk::SlidingCylinderSurface.

Definition at line 238 of file CylinderSurface.cxx.

 {
   // get the transform & transform global position into cylinder frame
   // transform it to the globalframe: CylinderSurfaces are allowed to have 0
   // pointer transform
   double radius = 0.;
   double inttol = bounds().r() * 0.0001;
   if (inttol < 0.01)
     inttol = 0.01;
   // do the transformation or not
   if (Trk::Surface::m_transforms) {
     Amg::Vector3D loc3Dframe(inverseTransformMultHelper(glopos));
     locpos = Amg::Vector2D(bounds().r() * loc3Dframe.phi(), loc3Dframe.z());
     radius = loc3Dframe.perp();
   } else {
     locpos = Amg::Vector2D(bounds().r() * glopos.phi(), glopos.z());
     radius = glopos.perp();
   }
   // return true or false
   return (fabs(radius - bounds().r()) <= inttol);
 }

◆ globalToLocal() [2/3]

std::optional<Amg::Vector2D> Trk::Surface::globalToLocal	(	const Amg::Vector3D &	glopos,
		const Amg::Vector3D &	glomom
	)		const

inherited

This method returns the LocalPosition from a provided GlobalPosition.

If the GlobalPosition is not on the Surface, it returns a nullopt This method does not check if the calculated LocalPosition is inside surface bounds. If this check is needed, use positionOnSurface - for generality with momentum

◆ globalToLocal() [3/3]

std::optional<Amg::Vector2D> Trk::Surface::globalToLocal	(	const Amg::Vector3D &	glopos,
		double	tol = `0.`
	)		const

inherited

This method returns the LocalPosition from a provided GlobalPosition.

If the GlobalPosition is not on the Surface, it returns nullopt This method does not check if the calculated LocalPosition is inside surface bounds. If this check is needed, use positionOnSurface - only for planar, cylinder surface fully defined

◆ hasBounds()

bool Trk::CylinderSurface::hasBounds ( ) const

inherited

◆ insideBounds()

virtual bool Trk::SubtractedCylinderSurface::insideBounds	(	const Amg::Vector2D &	locpos,
		double	tol1 = `0.`,
		double	tol2 = `0.`
	)		const

finaloverridevirtualinherited

This method calls the inside() method of the Bounds.

Reimplemented from Trk::CylinderSurface.

◆ insideBoundsCheck()

virtual bool Trk::CylinderSurface::insideBoundsCheck	(	const Amg::Vector2D &	locpos,
		const BoundaryCheck &	bchk
	)		const

finaloverridevirtualinherited

Implements Trk::Surface.

◆ insideVolume()

template<class Tvol >

Tvol const * Trk::BoundarySurface< Tvol >::insideVolume

inherited

getters/setters for inside/outside Volume

Definition at line 125 of file BoundarySurface.h.

                                                       {
   return m_insideVolume;
 }

◆ insideVolumeArray()

template<class Tvol >

const SharedObject< BinnedArray< Tvol > > & Trk::BoundarySurface< Tvol >::insideVolumeArray

inherited

getters/setters for inside/outside Volume arrays

Definition at line 144 of file BoundarySurface.h.

                                                {
   return m_insideVolumeArray;
 }

◆ inverseTransformHelper()

Amg::Transform3D Trk::Surface::inverseTransformHelper ( ) const

protectedinherited

Helper method to factorize in one place common operations calculate inverse transofrm and multiply with position.

◆ inverseTransformMultHelper()

Amg::Vector3D Trk::Surface::inverseTransformMultHelper ( const Amg::Vector3D & glopos ) const

protectedinherited

◆ isActive()

bool Trk::Surface::isActive ( ) const

inherited

Return 'true' if this surface is owned by the detector element.

◆ isFree()

bool Trk::Surface::isFree ( ) const

inherited

Returns 'true' if this surface is 'free', i.e.

it does not belong to a detector element (and returns false otherwise

◆ isOnSurface()

bool Trk::CylinderSurface::isOnSurface	(	const Amg::Vector3D &	glopo,
		const BoundaryCheck &	bchk = `true`,
		double	tol1 = `0.`,
		double	tol2 = `0.`
	)		const

overridevirtualinherited

This method returns true if the GlobalPosition is on the Surface for both, within or without check of whether the local position is inside boundaries or not.

Reimplemented from Trk::Surface.

Reimplemented in Trk::SlidingCylinderSurface.

Definition at line 263 of file CylinderSurface.cxx.

 {
   Amg::Vector3D loc3Dframe =
     Trk::Surface::m_transforms ? inverseTransformMultHelper(glopo) : glopo;
   return (bchk ? bounds().inside3D(loc3Dframe,
                                    tol1 + s_onSurfaceTolerance,
                                    tol2 + s_onSurfaceTolerance)
                : true);
 }

◆ localParametersToPosition()

virtual Amg::Vector2D Trk::CylinderSurface::localParametersToPosition ( const LocalParameters & locpars ) const

finaloverridevirtualinherited

Specialized for CylinderSurface : LocalParameters to Vector2D.

Reimplemented from Trk::Surface.

◆ localToGlobal() [1/5]

ATH_FLATTEN void Trk::CylinderSurface::localToGlobal	(	const Amg::Vector2D &	locp,
		const Amg::Vector3D &	mom,
		Amg::Vector3D &	glob
	)		const

overridevirtualinherited

Specialized for CylinderSurface : LocalToGlobal method without dynamic memory allocation.

Implements Trk::Surface.

Reimplemented in Trk::SlidingCylinderSurface.

Definition at line 223 of file CylinderSurface.cxx.

 {
   // create the position in the local 3d frame
   double r = bounds().r();
   double phi = locpos[Trk::locRPhi] / r;
   glopos = Amg::Vector3D(r * cos(phi), r * sin(phi), locpos[Trk::locZ]);
   // transform it to the globalframe: CylinderSurfaces are allowed to have 0
   // pointer transform
   if (Trk::Surface::m_transforms)
     glopos = transform() * glopos;
 }

◆ localToGlobal() [2/5]

Amg::Vector3D Trk::Surface::localToGlobal ( const Amg::Vector2D & locpos ) const

inherited

This method returns the GlobalPosition from a LocalPosition uses the per surface localToGlobal.

◆ localToGlobal() [3/5]

Amg::Vector3D Trk::Surface::localToGlobal	(	const Amg::Vector2D &	locpos,
		const Amg::Vector3D &	glomom
	)		const

inherited

This method returns the GlobalPosition from a LocalPosition The LocalPosition can be outside Surface bounds - for generality with momentum.

◆ localToGlobal() [4/5]

Amg::Vector3D Trk::Surface::localToGlobal ( const LocalParameters & locpars ) const

inherited

This method returns the GlobalPosition from LocalParameters The LocalParameters can be outside Surface bounds.

◆ localToGlobal() [5/5]

Amg::Vector3D Trk::Surface::localToGlobal	(	const LocalParameters &	locpars,
		const Amg::Vector3D &	glomom
	)		const

inherited

This method returns the GlobalPosition from LocalParameters The LocalParameters can be outside Surface bounds - for generality with momentum.

◆ materialLayer() [1/2]

Trk::Layer* Trk::Surface::materialLayer ( )

inherited

◆ materialLayer() [2/2]

const Trk::Layer* Trk::Surface::materialLayer ( ) const

inherited

return the material Layer

◆ measurementFrame()

Amg::RotationMatrix3D Trk::CylinderSurface::measurementFrame	(	const Amg::Vector3D &	glopos,
		const Amg::Vector3D &	glomom
	)		const

finaloverridevirtualinherited

Return the measurement frame - this is needed for alignment, in particular for StraightLine and Perigee Surface.

the default implementation is the the RotationMatrix3D of the transform

Reimplemented from Trk::Surface.

Definition at line 190 of file CylinderSurface.cxx.

 {
   Amg::RotationMatrix3D mFrame;
   // construct the measurement frame
   Amg::Vector3D measY(
     transform().rotation().col(2)); // measured Y is the z axis
   Amg::Vector3D measDepth =
     Amg::Vector3D(pos.x(), pos.y(), 0.)
       .unit(); // measured z is the position transverse normalized
   Amg::Vector3D measX(
     measY.cross(measDepth).unit()); // measured X is what comoes out of it
   // the columnes
   mFrame.col(0) = measX;
   mFrame.col(1) = measY;
   mFrame.col(2) = measDepth;
   // return the rotation matrix
   return mFrame;
 }

◆ name()

virtual std::string Trk::SubtractedCylinderSurface::name ( ) const

inlinefinaloverridevirtualinherited

Return properly formatted class name for screen output.

Reimplemented from Trk::CylinderSurface.

Definition at line 71 of file SubtractedCylinderSurface.h.

   {
     return "Trk::SubtractedCylinderSurface";
   }

◆ normal() [1/2]

virtual const Amg::Vector3D& Trk::Surface::normal ( ) const

virtualinherited

Returns the normal vector of the Surface (i.e.

in generall z-axis of rotation)

Reimplemented in Trk::PerigeeSurface.

◆ normal() [2/2]

virtual Amg::Vector3D Trk::CylinderSurface::normal ( const Amg::Vector2D & locpo ) const

finaloverridevirtualinherited

Return method for surface normal information at a given local point, overwrites the normal() from base class.

Reimplemented from Trk::Surface.

◆ numberOfInstantiations()

static std::size_t Trk::ObjectCounter< Trk::Surface >::numberOfInstantiations ( )

inlinestaticinherited

Definition at line 25 of file TrkObjectCounter.h.

   {
 #ifndef NDEBUG
     return s_numberOfInstantiations.load();
 #endif
     return 0;
   }

◆ onBoundary()

template<class Tvol >

template<class T >

bool Trk::BoundarySurface< Tvol >::onBoundary ( const T & pars ) const

inlineinherited

templated onBoundary method

Definition at line 90 of file BoundarySurface.h.

                                        {
     return surfaceRepresentation().onSurface(pars);
   }

◆ onSurface()

template<class T >

bool Trk::Surface::onSurface	(	const T &	parameters,
		const BoundaryCheck &	bchk = `BoundaryCheck(true)`
	)		const

inherited

The templated Parameters OnSurface method - checks on surface pointer first.

◆ operator!=()

bool Trk::Surface::operator!= ( const Surface & sf ) const

inherited

Non-equality operator.

◆ operator=()

template<class Tvol >

BoundarySubtractedCylinderSurface& Trk::BoundarySubtractedCylinderSurface< Tvol >::operator= ( const BoundarySubtractedCylinderSurface< Tvol > & vol )

default

Assignment operator.

◆ operator==() [1/2]

bool Trk::CylinderSurface::operator== ( const CylinderSurface & cf ) const

inherited

◆ operator==() [2/2]

bool Trk::SubtractedCylinderSurface::operator== ( const Surface & sf ) const

finaloverridevirtualinherited

Equality operator.

Reimplemented from Trk::CylinderSurface.

Definition at line 60 of file SubtractedCylinderSurface.cxx.

 {
   // first check the type not to compare apples with oranges
   const Trk::SubtractedCylinderSurface* scsf = dynamic_cast<const Trk::SubtractedCylinderSurface*>(&sf);
   if (!scsf)
     return false;
   bool surfaceEqual = Trk::CylinderSurface::operator==(sf);
   bool sharedEqual = (surfaceEqual) ? (shared() == scsf->shared()) : false;
   return sharedEqual;
 }

◆ outsideVolume()

template<class Tvol >

Tvol const * Trk::BoundarySurface< Tvol >::outsideVolume

inherited

Definition at line 134 of file BoundarySurface.h.

                                                        {
   return m_outsideVolume;
 }

◆ outsideVolumeArray()

template<class Tvol >

const SharedObject< BinnedArray< Tvol > > & Trk::BoundarySurface< Tvol >::outsideVolumeArray

inherited

Definition at line 155 of file BoundarySurface.h.

                                                 {
   return m_outsideVolumeArray;
 }

◆ owner()

SurfaceOwner Trk::Surface::owner ( ) const

inherited

return ownership

◆ pathCorrection()

virtual double Trk::CylinderSurface::pathCorrection	(	const Amg::Vector3D &	pos,
		const Amg::Vector3D &	mom
	)		const

overridevirtualinherited

the pathCorrection for derived classes with thickness

Reimplemented from Trk::Surface.

◆ positionOnSurface()

std::optional< Amg::Vector2D > Surface::positionOnSurface	(	const Amg::Vector3D &	glopo,
		const BoundaryCheck &	bchk = `true`,
		double	tol1 = `0.`,
		double	tol2 = `0.`
	)		const

inherited

positionOnSurface() returns the LocalPosition on the Surface,
If BoundaryCheck==false it just returns the value of globalToLocal (including nullptr possibility), if BoundaryCheck==true it checks whether the point is inside bounds or not (returns std::nullopt in this case).

Definition at line 106 of file Surface.cxx.

 {
   std::optional<Amg::Vector2D> posOnSurface = globalToLocal(glopo, tol1);
   if (!bchk){
     return posOnSurface;
   }
   if (posOnSurface && insideBounds(*posOnSurface, tol1, tol2)){
     return posOnSurface;
   }
   return std::nullopt;
 }

◆ rotSymmetryAxis()

const Amg::Vector3D & Trk::CylinderSurface::rotSymmetryAxis ( ) const

virtualinherited

Return method for the rotational symmetry axis - the z-Axis of the HepTransform.

Definition at line 211 of file CylinderSurface.cxx.

 {
   if (!m_rotSymmetryAxis) {
     Amg::Vector3D zAxis(transform().rotation().col(2));
     m_rotSymmetryAxis.set(std::make_unique<Amg::Vector3D>(zAxis));
   }
   return (*m_rotSymmetryAxis);
 }

◆ setInsideVolume()

template<class Tvol >

void Trk::BoundarySurface< Tvol >::setInsideVolume ( const Tvol * vol )

inherited

Definition at line 129 of file BoundarySurface.h.

                                                            {
   m_insideVolume = vol;
 }

◆ setInsideVolumeArray()

template<class Tvol >

void Trk::BoundarySurface< Tvol >::setInsideVolumeArray ( const SharedObject< VolumeArray > & )

inherited

Definition at line 148 of file BoundarySurface.h.

                                                      {
   m_insideVolumeArray = volArray;
 }

◆ setMaterialLayer()

void Trk::Surface::setMaterialLayer ( std::shared_ptr< Layer > mlay )

inherited

set material layer

◆ setOutsideVolume()

template<class Tvol >

void Trk::BoundarySurface< Tvol >::setOutsideVolume ( const Tvol * vol )

inherited

Definition at line 138 of file BoundarySurface.h.

                                                             {
   m_outsideVolume = vol;
 }

◆ setOutsideVolumeArray()

template<class Tvol >

void Trk::BoundarySurface< Tvol >::setOutsideVolumeArray ( const SharedObject< VolumeArray > & )

inherited

Definition at line 159 of file BoundarySurface.h.

                                                      {
   m_outsideVolumeArray = volArray;
 }

◆ setOwner()

void Trk::Surface::setOwner ( SurfaceOwner x )

inherited

set Ownership

◆ setTransform()

void Trk::Surface::setTransform ( const Amg::Transform3D & trans )

inherited

Set the transform updates center and normal.

◆ shared()

bool Trk::SubtractedCylinderSurface::shared ( ) const

inherited

This method indicates the subtraction mode.

◆ straightLineDistanceEstimate() [1/2]

ATH_FLATTEN Trk::DistanceSolution Trk::CylinderSurface::straightLineDistanceEstimate	(	const Amg::Vector3D &	pos,
		const Amg::Vector3D &	dir
	)		const

overridevirtualinherited

fast distance to Surface

distance to surface

Implements Trk::Surface.

Reimplemented in Trk::SlidingCylinderSurface.

Definition at line 377 of file CylinderSurface.cxx.

 {
   double tol = 0.001;
  
   const Amg::Vector3D& X = center(); // point
   const Amg::Vector3D& S = normal(); // vector
  
   double radius = bounds().r();
   double sp = pos.dot(S);
   double sc = X.dot(S);
   double dp = dir.dot(S);
   Amg::Vector3D dx = X - pos - (sc - sp) * S; // vector
   Amg::Vector3D ax = dir - dp * S;            // vector
  
   double A = ax.dot(ax); // size of projected direction (squared)
   double B = ax.dot(dx); // dot product (->cos angle)
   double C = dx.dot(dx); // distance to axis (squared)
   double currDist = radius - sqrt(C);
  
   if (A == 0.) { // direction parallel to cylinder axis
     if (fabs(currDist) < tol) {
       return {1, 0., true, 0.}; // solution at surface
     }
     return {
       0, currDist, true, 0.}; // point of closest approach without intersection
   }
  
   // minimal distance to cylinder axis
   // The [[maybe_unused]] declaration is to suppress redundant division checking
   // here. Even a tiny change in rmin (~1e-13) can cause huge changes in the
   // reconstructed output, so don't change how it's evaluated.
   [[maybe_unused]] const double rmin_tmp = B * B / A;
   const double rmin2 = C - rmin_tmp;
   const double rmin = rmin2 < 0 ? 0 : sqrt(rmin2);
  
   if (rmin > radius) { // no intersection
     double first = B / A;
     return {
       0,
       currDist,
       true,
       first}; // point of closest approach without intersection
   }
   if (fabs(rmin - radius) <
       tol) { // tangential 'intersection' - return double solution
     double first = B / A;
     return {2, currDist, true, first, first};
   }
   // The [[maybe_unused]] declaration here suppresses redundant division
   // checking. We don't want to rewrite how this is evaluated due to
   // instabilities.
   [[maybe_unused]] const double b_a = B / A;
   const double x = sqrt((radius - rmin) * (radius + rmin) / A);
   double first = b_a - x;
   double second = b_a + x;
   if (first >= 0.) {
     return {2, currDist, true, first, second};
   }
   if (second <= 0.) {
     return {2, currDist, true, second, first};
   } // inside cylinder
   return {2, currDist, true, second, first};
 }

◆ straightLineDistanceEstimate() [2/2]

Trk::DistanceSolution Trk::CylinderSurface::straightLineDistanceEstimate	(	const Amg::Vector3D &	pos,
		const Amg::Vector3D &	dir,
		bool	bound
	)		const

overridevirtualinherited

fast distance to Surface - with bounds directive

Implements Trk::Surface.

Reimplemented in Trk::SlidingCylinderSurface.

Definition at line 444 of file CylinderSurface.cxx.

 {
   const double tolb = .01;
  
   const Amg::Transform3D& T = transform();
   //  double                Ax[3] = {T.xx(),T.yx(),T.zx()};
   //  double                Ay[3] = {T.xy(),T.yy(),T.zy()};
   //  double                Az[3] = {T.xz(),T.yz(),T.zz()};
  
   // Transformation to cylinder system coordinates
   //
  
   // BEGIN here is what i guess this might mean: BEGIN
   Amg::Vector3D Ax = T.rotation().col(0);
   Amg::Vector3D Ay = T.rotation().col(1);
   Amg::Vector3D Az = T.rotation().col(2);
  
   Amg::Vector3D dxyz = pos - T.translation();
   double x = dxyz.dot(Ax);
   double y = dxyz.dot(Ay);
   double z = dxyz.dot(Az);
   double ax = dir.dot(Ax);
   double ay = dir.dot(Ay);
   double at = ax * ax + ay * ay;
   double r = sqrt(x * x + y * y);
   double R = bounds().r();
  
   // END here is what i guessed this means END
  
   //  double dx  = pos[0]-T.dx()                         ;
   //  double dy  = pos[1]-T.dy()                         ;
   //  double dz  = pos[2]-T.dz()                         ;
   //  double x   = dx*Ax[0]+dy*Ax[1]+dz*Ax[2]            ;
   //  double y   = dx*Ay[0]+dy*Ay[1]+dz*Ay[2]            ;
   //  double z   = dx*Az[0]+dy*Az[1]+dz*Az[2]            ;
   //  double ax  = dir[0]*Ax[0]+dir[1]*Ax[1]+dir[2]*Ax[2];
   //  double ay  = dir[0]*Ay[0]+dir[1]*Ay[1]+dir[2]*Ay[2];
   //  double at  = ax*ax+ay*ay                           ;
   //  double r   = sqrt(x*x+y*y)                         ;
   //  double R   = bounds().r()                          ;
  
   // Step to surface
   //
   int ns = 0;
   double s1 = 0.;
   double s2 = 0.;
  
   if (at != 0.) {
  
     const double inv_at = 1. / at;
     double A = -(ax * x + ay * y) * inv_at;
     double B = A * A + (R - r) * (R - r) * inv_at;
  
     if (B >= 0.) {
  
       B = sqrt(B);
       if (B > tolb) {
         if (A > 0.) {
           s1 = A - B;
           s2 = A + B;
         } else {
           s1 = A + B;
           s2 = A - B;
         }
         ns = 2;
       } else {
         s1 = A;
         ns = 1;
       }
     }
   }
   double sr = r - R;
   if (!bound)
     return {ns, fabs(sr), true, s1, s2};
  
   // Min distance to surface
   //
   Amg::Vector2D lp(atan2(y, x) * R, 0.);
  
   double d = bounds().minDistance(lp);
   double sz = fabs(z) - bounds().halflengthZ();
   if (sz <= 0.)
     sz = 0.;
   double dist = sr * sr + sz * sz;
   if (d > 0.)
     dist += ((d * d) * (sr / R + 1.));
  
   return {ns, sqrt(dist), true, s1, s2};
 }

◆ straightLineIntersection() [1/2]

Trk::Intersection Trk::CylinderSurface::straightLineIntersection	(	const Amg::Vector3D &	pos,
		const Amg::Vector3D &	dir,
		bool	forceDir = `false`,
		Trk::BoundaryCheck	bchk = `false`
	)		const

finaloverridevirtualinherited

fast straight line intersection schema - provides closest intersection and (signed) path length

mathematical motivation:

The calculation will be done in the 3-dim frame of the cylinder, i.e. the symmetry axis of the cylinder is the z-axis, x- and y-axis are perpenticular to the the z-axis. In this frame the cylinder is centered around the origin. Therefore the two points describing the line have to be first recalculated into the new frame. Suppose, this is done, the intersection is straight forward:
may \(p_{1}=(p_{1x}, p_{1y}, p_{1z}), p_{2}=(p_{2x}, p_{2y}, p_{2z}) \)@_fakenlthe two points describing the 3D-line, then the line in the \(x-y\)plane can be written as \(y=kx+d\), where \(k =\frac{p_{2y}-p_{1y}}{p_{2x}-p_{1x}}\)such as \(d=\frac{p_{2x}p_{1y}-p_{1x}p_{2y}}{p_{2x}-p_{1x}},\)
and intersects with the corresponding circle \(x^{2}+y^{2} = R^{2}. \)
The solutions can then be found by a simple quadratic equation and reinsertion into the line equation.

Implements Trk::Surface.

Definition at line 277 of file CylinderSurface.cxx.

 {
   bool needsTransform = m_transforms || m_associatedDetElement;
   // create the hep points
   Amg::Vector3D point1 = pos;
   Amg::Vector3D direction = dir;
   if (needsTransform) {
     Amg::Transform3D invTrans = inverseTransformHelper();
     point1 = invTrans * pos;
     direction = invTrans.linear() * dir;
   }
   // the bounds radius
   double R = bounds().r();
   double t1 = 0.;
   double t2 = 0.;
   if (direction.x()) {
     // get line and circle constants
     double idirx = 1. / direction.x();
     double k = direction.y() * idirx;
     double d = point1.y() - point1.x() * k;
     // and solve the qaudratic equation
     Trk::RealQuadraticEquation pquad(1 + k * k, 2 * k * d, d * d - R * R);
     if (pquad.solutions != Trk::none) {
       // the solutions in the 3D frame of the cylinder
       t1 = (pquad.first - point1.x()) * idirx;
       t2 = (pquad.second - point1.x()) * idirx;
     } else // bail out if no solution exists
       return {pos, 0., false};
   } else if (direction.y()) {
     // x value is the one of point1
     // x^2 + y^2 = R^2
     // y = sqrt(R^2-x^2)
     double x = point1.x();
     double r2mx2 = R * R - x * x;
     // bail out if no solution
     if (r2mx2 < 0.)
       return {pos, 0., false};
     double y = sqrt(r2mx2);
     // assign parameters and solutions
     double idiry = 1. / direction.y();
     t1 = (y - point1.y()) * idiry;
     t2 = (-y - point1.y()) * idiry;
   } else {
     return {pos, 0., false};
   }
   Amg::Vector3D sol1raw(point1 + t1 * direction);
   Amg::Vector3D sol2raw(point1 + t2 * direction);
   // now reorder and return
   Amg::Vector3D solution(0, 0, 0);
   double path = 0.;
  
   // first check the validity of the direction
   bool isValid = true;
  
   // both solutions are of same sign, take the smaller, but flag as false if not
   // forward
   if (t1 * t2 > 0 || !forceDir) {
     // asign validity
     isValid = forceDir ? (t1 > 0.) : true;
     // assign the right solution
     if (t1 * t1 < t2 * t2) {
       solution = sol1raw;
       path = t1;
     } else {
       solution = sol2raw;
       path = t2;
     }
   } else {
     if (t1 > 0.) {
       solution = sol1raw;
       path = t1;
     } else {
       solution = sol2raw;
       path = t2;
     }
   }
   // the solution is still in the local 3D frame, direct check
   isValid =
     bchk ? (isValid && m_bounds->inside3D(solution,
                                           Trk::Surface::s_onSurfaceTolerance,
                                           Trk::Surface::s_onSurfaceTolerance))
          : isValid;
  
   // now return
   return needsTransform ? Intersection(transform() * solution, path, isValid)
                         : Intersection(solution, path, isValid);
 }

◆ straightLineIntersection() [2/2]

template<class T >

Intersection Trk::Surface::straightLineIntersection	(	const T &	pars,
		bool	forceDir = `false`,
		const Trk::BoundaryCheck &	bchk = `false`
	)		const

inlineinherited

fst straight line intersection schema - templated for charged and neutral parameters

Definition at line 351 of file Tracking/TrkDetDescr/TrkSurfaces/TrkSurfaces/Surface.h.

   {
     return straightLineIntersection(
       pars.position(), pars.momentum().unit(), forceDir, bchk);
   }

◆ subtractedVolume()

SharedObject<AreaExcluder> Trk::SubtractedCylinderSurface::subtractedVolume ( ) const

inherited

This method allows access to the subtracted part.

◆ surfaceRepresentation() [1/2]

template<class Tvol >

virtual const Surface& Trk::BoundarySubtractedCylinderSurface< Tvol >::surfaceRepresentation ( ) const

finaloverridevirtual

The Surface Representation of this.

Implements Trk::BoundarySurface< Tvol >.

◆ surfaceRepresentation() [2/2]

template<class Tvol >

virtual Surface& Trk::BoundarySubtractedCylinderSurface< Tvol >::surfaceRepresentation ( )

finaloverridevirtual

Implements Trk::BoundarySurface< Tvol >.

◆ transform()

const Amg::Transform3D& Trk::Surface::transform ( ) const

inherited

Returns HepGeom::Transform3D by reference.

◆ type()

constexpr virtual SurfaceType Trk::CylinderSurface::type ( ) const

constexprfinaloverridevirtualinherited

Return the surface type.

Implements Trk::Surface.

◆ uniqueClone()

std::unique_ptr<Surface> Trk::Surface::uniqueClone ( ) const

inherited

NVI method returning unique_ptr clone.

Member Data Documentation

◆ m_associatedDetElement

const TrkDetElementBase* Trk::Surface::m_associatedDetElement {}

protectedinherited

Not owning Pointer to the TrkDetElementBase.

Definition at line 439 of file Tracking/TrkDetDescr/TrkSurfaces/TrkSurfaces/Surface.h.

◆ m_associatedDetElementId

Identifier Trk::Surface::m_associatedDetElementId {}

protectedinherited

Identifier for the TrkDetElementBase.

Definition at line 442 of file Tracking/TrkDetDescr/TrkSurfaces/TrkSurfaces/Surface.h.

◆ m_associatedLayer

const Layer* Trk::Surface::m_associatedLayer {}

protectedinherited

The associated layer Trk::Layer.

layer in which the Surface is embedded (not owning pointed)

Definition at line 448 of file Tracking/TrkDetDescr/TrkSurfaces/TrkSurfaces/Surface.h.

◆ m_bounds

SharedObject<const CylinderBounds> Trk::CylinderSurface::m_bounds

protectedinherited

The global reference point (== a point on the surface)

Definition at line 290 of file CylinderSurface.h.

◆ m_insideVolume

template<class Tvol >

const Tvol* Trk::BoundarySurface< Tvol >::m_insideVolume

protectedinherited

Definition at line 118 of file BoundarySurface.h.

◆ m_insideVolumeArray

template<class Tvol >

SharedObject<VolumeArray> Trk::BoundarySurface< Tvol >::m_insideVolumeArray

protectedinherited

Definition at line 120 of file BoundarySurface.h.

◆ m_materialLayer

std::shared_ptr<Layer> Trk::Surface::m_materialLayer {}

protectedinherited

Possibility to attach a material descrption.

potentially given as the associated material layer (not owning pointer)

Definition at line 453 of file Tracking/TrkDetDescr/TrkSurfaces/TrkSurfaces/Surface.h.

◆ m_outsideVolume

template<class Tvol >

const Tvol* Trk::BoundarySurface< Tvol >::m_outsideVolume

protectedinherited

Definition at line 119 of file BoundarySurface.h.

◆ m_outsideVolumeArray

template<class Tvol >

SharedObject<VolumeArray> Trk::BoundarySurface< Tvol >::m_outsideVolumeArray

protectedinherited

Definition at line 121 of file BoundarySurface.h.

◆ m_owner

SurfaceOwner Trk::Surface::m_owner {SurfaceOwner::noOwn}

protectedinherited

enum for surface owner : 0 free surface

Definition at line 455 of file Tracking/TrkDetDescr/TrkSurfaces/TrkSurfaces/Surface.h.

◆ m_referencePoint

CxxUtils::CachedUniquePtr<Amg::Vector3D> Trk::CylinderSurface::m_referencePoint

protectedinherited

The rotational symmetry axis.

Definition at line 292 of file CylinderSurface.h.

◆ m_rotSymmetryAxis

CxxUtils::CachedUniquePtr<Amg::Vector3D> Trk::CylinderSurface::m_rotSymmetryAxis

protectedinherited

Definition at line 294 of file CylinderSurface.h.

◆ m_shared

bool Trk::SubtractedCylinderSurface::m_shared

protectedinherited

Definition at line 78 of file SubtractedCylinderSurface.h.

◆ m_subtrVol

SharedObject<AreaExcluder> Trk::SubtractedCylinderSurface::m_subtrVol

protectedinherited

Definition at line 77 of file SubtractedCylinderSurface.h.

◆ m_transforms

std::unique_ptr<Transforms> Trk::Surface::m_transforms {}

protectedinherited

Definition at line 436 of file Tracking/TrkDetDescr/TrkSurfaces/TrkSurfaces/Surface.h.

◆ s_numberOfInstantiations

std::atomic_size_t Trk::ObjectCounter< Trk::Surface >::s_numberOfInstantiations

inlinestaticinherited

Definition at line 22 of file TrkObjectCounter.h.

◆ s_onSurfaceTolerance

constexpr double Trk::Surface::s_onSurfaceTolerance = 10e-5

staticconstexprprotectedinherited

Tolerance for being on Surface.

Definition at line 458 of file Tracking/TrkDetDescr/TrkSurfaces/TrkSurfaces/Surface.h.

◆ staticType

constexpr SurfaceType Trk::CylinderSurface::staticType = SurfaceType::Cylinder

staticconstexprinherited

The surface type static constexpr.

Definition at line 59 of file CylinderSurface.h.

The documentation for this class was generated from the following file:

BoundarySubtractedCylinderSurface.h

Public Types

Public Member Functions

Static Public Member Functions

Static Public Attributes

Protected Member Functions

Protected Attributes

Static Protected Attributes

Private Types

Detailed Description

template<class Tvol> class Trk::BoundarySubtractedCylinderSurface< Tvol >

Member Typedef Documentation

◆ ChargedTrackParametersUniquePtr

◆ NeutralTrackParametersUniquePtr

◆ VolumeArray

Constructor & Destructor Documentation

◆ BoundarySubtractedCylinderSurface() [1/5]

◆ BoundarySubtractedCylinderSurface() [2/5]

◆ ~BoundarySubtractedCylinderSurface()

◆ BoundarySubtractedCylinderSurface() [3/5]

◆ BoundarySubtractedCylinderSurface() [4/5]

◆ BoundarySubtractedCylinderSurface() [5/5]

Member Function Documentation

◆ associatedDetectorElement()

◆ associatedDetectorElementIdentifier()

◆ associatedLayer()

◆ associateLayer()

◆ attachedVolume() [1/2]

◆ attachedVolume() [2/2]

◆ baseSurface()

◆ bounds()

◆ cachedTransform()

◆ center()

◆ clone()

◆ createUniqueNeutralParameters() [1/2]

◆ createUniqueNeutralParameters() [2/2]

◆ createUniqueParameters() [1/2]

◆ createUniqueParameters() [2/2]

◆ createUniqueTrackParameters() [1/2]

◆ createUniqueTrackParameters() [2/2]

◆ debugInfo()

◆ dump() [1/2]

◆ dump() [2/2]

◆ globalReferencePoint()

◆ globalToLocal() [1/3]

◆ globalToLocal() [2/3]

◆ globalToLocal() [3/3]

◆ hasBounds()

◆ insideBounds()

◆ insideBoundsCheck()

◆ insideVolume()

◆ insideVolumeArray()

◆ inverseTransformHelper()

◆ inverseTransformMultHelper()

◆ isActive()

◆ isFree()

◆ isOnSurface()

◆ localParametersToPosition()

◆ localToGlobal() [1/5]

◆ localToGlobal() [2/5]

◆ localToGlobal() [3/5]

◆ localToGlobal() [4/5]

◆ localToGlobal() [5/5]

◆ materialLayer() [1/2]

◆ materialLayer() [2/2]

◆ measurementFrame()

◆ name()

◆ normal() [1/2]

◆ normal() [2/2]

◆ numberOfInstantiations()

◆ onBoundary()

◆ onSurface()

◆ operator!=()

◆ operator=()

◆ operator==() [1/2]

◆ operator==() [2/2]

◆ outsideVolume()

◆ outsideVolumeArray()

◆ owner()

◆ pathCorrection()

◆ positionOnSurface()

template<class Tvol>
class Trk::BoundarySubtractedCylinderSurface< Tvol >