SCT_ConditionsAlgorithms Package

Author

Susum.nosp@m.u.Od.nosp@m.a@cer.nosp@m.n.ch

Introduction

This package contains condition algorithm and test algorithms for SCT condition tools in SCT_ConditionsTools package

Class Overview

SCT_ConditionsAlgorithms package contains the following classes.

Condition algorithms

• SCT_AlignCondAlg
  • Purpose: For SCT alignment. Followed by SCT_DetectorElementCondAlg
  • Input condition folder: /Indet/Align or (Indet/AlignL1/ID, /Indet/AlignL2/SCT, /Indet/AlignL3)
  • Output condition data: GeoAlignmentStore ("SCTAlignmentStore")
• SCT_ConditionsParameterCondAlg
  • Purpose: For SCT_ConditionsParameterTool
  • Input condition folder: /SCT/DAQ/Configuration/Chip
  • Output condition data: SCT_CondParameterData ("SCT_CondParameterData")
• SCT_ConfigurationCondAlg
  • Purpose: For SCT_ConfigurationConditionsTool
  • Input condition folder: /SCT/DAQ/Config(uration)/{Chip(Slim),Module,MUR,RODMUR,ROD,Geog}
  • Output condition data: SCT_ConfigurationCondData ("SCT_ConfigurationCondData")
• SCT_DCSConditionsHVCondAlg
  • Purpose: For SCT_DCSConditionsTool
  • Input condition folder: /SCT/DCS/HV
  • Output condition data: SCT_DCSFloatCondData ("SCT_DCSHVCondData")
• SCT_DCSConditionsStatCondAlg
  • Purpose: For SCT_DCSConditionsTool
  • Input condition folder: /SCT/DCS/{HV,CHANSTAT}
  • Output condition data: SCT_DCSStatCondData ("SCT_DCSStatCondData")
• SCT_DCSConditionsTempCondAlg
  • Purpose: For SCT_DCSConditionsTool
  • Input condition folder: /SCT/DCS/MODTEMP
  • Output condition data: SCT_DCSFloatCondData ("SCT_DCSTemp0CondData")
• SCT_DetectorElementCondAlg
  • Purpose: For SCT alignment
  • Input condition data: GeoAlignmentStore ("SCTAlignmentStore")
  • Output condition data: InDetDD::SiDetectorElementCollection> ("SCT_DetectorElementCollection")
• SCT_LinkMaskingCondAlg
  • Purpose: For SCT_LinkMaskingTool
  • Input condition folder: /purple/pants (created by createLinkMaskingSQLiteFile.py)
  • Output condition data: SCT_ModuleVetoCondData ("SCT_LinkMaskingCondData")
• SCT_MajorityCondAlg
  • Purpose: For SCT_MajorityConditionsTool
  • Input condition folder: /SCT/DCS/MAJ
  • Output condition data: SCT_MajorityCondData ("SCT_MajorityCondData")
• SCT_ModuleVetoCondAlg
  • Purpose: For SCT_ModuleVetoTool
  • Input condition folder: /SCT/Manual/BadModules
  • Output condition data: SCT_ModuleVetoCondData ("SCT_ModuleVetoCondData")
• SCT_MonitorCondAlg
  • Purpose: For SCT_MonitorConditionsTool
  • Input condition folder: /SCT/Derived/Monitoring
  • Output condition data: SCT_MonitorCondData ("SCT_MonitorCondData")
• SCT_RODVetoCondAlg
  • Purpose: For SCT_RODVetoToolSCT_RODVetoTool
  • Input condition folder: None (specified by "BadRODIds" in job option)
  • Output condition data: IdentifierSet ("BadSCTModuleIds_RODVeto")
• SCT_ReadCalibChipGainCondAlg
  • Purpose: For SCT_ReadCalibChipDataTool
  • Input condition folder: /SCT/DAQ/Calibration/ChipGain
  • Output condition data: SCT_GainCalibData ("SCT_GainCalibData")
• SCT_ReadCalibChipNoiseCondAlg
  • Purpose: For SCT_ReadCalibChipDataTool
  • Input condition folder: /SCT/DAQ/Calibration/ChipNoise
  • Output condition data: SCT_NoiseCalibData ("SCT_NoiseCalibData")
• SCT_ReadCalibDataCondAlg
  • Purpose: For SCT_ReadCalibDataTool
  • Input condition folder: /SCT/DAQ/Calibration/{NoiseOccupancyDefects,NPtGainDefects}
  • Output condition data: SCT_CalibDefectData ("SCT_CalibDefectNPtGain", "SCT_CalibDefectNPtNoise"), SCT_AllGoodStripInfo ("SCT_AllGoodStripInfo")
• SCT_SensorsCondAlg
  • Purpose: For SCT_SensorsTool
  • Input condition folder: /SCT/Sensors
  • Output condition data: SCT_SensorsCondData ("SCT_SensorsCondData")
• SCT_SiliconHVCondAlg
  • Purpose: For SCT_SiliconConditionsTool
  • Input condition data: SCT_DCSStatCondData ("SCT_DCSStatCondData"), SCT_DCSFloatCondData ("SCT_DCSHVCondData")
  • Output condition data: SCT_DCSFloatCondData ("SCT_SiliconBiasVoltCondData")
• SCT_SiliconTempCondAlg
  • Purpose: For SCT_SiliconConditionsTool
  • Input condition data: SCT_DCSStatCondData ("SCT_DCSStatCondData"), SCT_DCSFloatCondData ("SCT_DCSTemp0CondData")
  • Output condition data: SCT_DCSFloatCondData ("SCT_SiliconTempCondData")
• SCT_TdaqEnabledCondAlg
  • Purpose: For SCT_TdaqEnabledTool
  • Input condition folder: /TDAQ/Resources/ATLAS/SCT/Robins (>=Run 2) or /TDAQ/EnabledResources/ATLAS/SCT/Robins (Run 1)
  • Output condition data: SCT_TdaqEnabledCondData ("SCT_TdaqEnabledCondData")

Test algorithms

• SCT_ByteStreamErrorsTestAlg
  • Purpose: To test SCT_ByteStreamErrorsTool
  • Test script: testBSError.py
• SCT_ConditionsParameterTestAlg
  • Purpose: To test SCT_ConditionsParameterTool
  • Test script: testParameters.py
• SCT_ConditionsSummaryTestAlg
  • Purpose: To test SCT_ConditionsSummaryTool
  • Test script: testSummary.py
• SCT_ConfigurationConditionsTestAlg
  • Purpose: To test SCT_ConfigurationConditionsTool
  • Test script: testConfig.py
• SCT_DCSConditionsTestAlg
  • Purpose: To test SCT_DCSConditionsTool
  • Test script: testDCSConditions.py
• SCT_FlaggedConditionTestAlg
  • Purpose: To test SCT_FlaggedConditionTool
  • Test script: testFlagged.py
• SCT_LinkMaskingTestAlg
  • Purpse: To test SCT_LinkMaskingTool
  • Test script: TestLinkMasking.sh
• SCT_MajorityConditionsTestAlg
  • Purpose: To test SCT_MajorityConditionsTool
  • Test script: testMajority.py
• SCT_ModuleVetoTestAlg
  • Purpose: To test SCT_ModuleVetoTool
  • Test script: testModuleVeto.py
• SCT_MonitorConditionsTestAlg
  • Purpose: To test SCT_MonitorConditionsTool
  • Test script: testMonRead.py
• SCT_RODVetoTestAlg
  • Purpose: To test SCT_RODVetoTool
  • Test script: testRodVeto.py
• SCT_ReadCalibChipDataTestAlg
  • Purpose: To test SCT_ReadCalibChipDataTool
  • Test script: testCalibChipRead.py
• SCT_ReadCalibDataTestAlg
  • Purpose: To test SCT_ReadCalibDataTool
  • Test script: testCalibRead.py
• SCT_ReadoutTestAlg
  • Purpose: To test SCT_ReadoutTool
  • Test script: testReadout.py
• SCT_SensorsTestAlg
  • Purpose: To test SCT_SensorsTool
  • Test script: testSensors.py
• SCT_SiliconConditionsTestAlg
  • Purpose: To test SCT_SiliconConditionsTool
  • Test script: testSilicon.py
• SCT_StripVetoTestAlg
  • Purpose: To test SCT_StripVetoTool
  • Test script: testStripVeto.py
• SCT_TdaqEnabledTestAlg
  • Purpose: To test SCT_TdaqEnabledTool
  • Test script: testTdaqEnabled.py

Files for utilities

• FillFromStringUtility.h
  • fillArrayFromString and fillEmptyVectorFromString functions
  • Used by SCT_ReadCalibChipGainCondAlg.cxx, SCT_ReadCalibChipNoiseCondAlg.cxx, SCT_ReadCalibDataCondAlg.cxx
• SCT_ConditionsUtilities.h and SCT_ConditionsUtilities.cxx
  • getenv function
  • Used by SCT_ConditionsParameterTestAlg.cxx
• SCT_SimpleHisto.h
  • init, fill, asXmlString, xmlHeader, stylesheet functions
  • Used by SCT_ConditionsParameterTestAlg.cxx